Comments for Aquabot S2-40

Average Rating starstarstarstarstar

Click here to add your own comments

May 11, 2015
Rating
starstarstarstarstar
Got it apart controller s240
by: Anonymous

I am looking for the electrical schematics for the controller. I had to replace the cord between the controller and the propeller motor as it got crimped. Now the vacuum will only go one direction. I can hear the controller click and then the motor stops. It turns freely by hand in either direction. I put a multimeter on the outlet plug to the motor and I initially get voltage and then the click and it goes to zero. I took the controller apart and the best I can guess is the songle relay srd-05vdc-slc is bad in that direction (there are two beside the out1 and out2). But not sure if I can pull it. Is it sautered into place or just held with the pins? Would appreciate any help you can provide as everything else on the unit works and don’t want to have to buy a new one.

May 09, 2015
Rating
starstarstarstarstar
electrical schematics for S2-40
by: Anonymous

Did you get electrical schematics? I too have an S2-40 and it won't go in reverse and would love to see the schematics. How did you get your controller apart? I see the four rivets but having a heck of a time getting the two black end caps off (even after the screws are revmoved).

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Repair stories.

Return to Aquabot S2-40.