Hi, I believe the outlet on the power supply is one piece. A center hub with 4 female connectors.
Is this what has fallen inside the power supply? If so, just buy a new outlet. It unscrews from the outside of the power supply
Aug 31, 2010 Rating
Comments for dolphin commander problem by: raj
Hi curt:
all the thanks from my heart for making suggestion,
whatever U have suggested I am going explore and try. The side plate as U suggested could be the culprit as one one side the track came out loose.
I will keep u posted and thanks again for your thought and suggestion.
second question I have to ask U I have old Power supply for dolphin yellow color. it has the female plug quite a bit inside rather outer part. Is there extender for it.
Thanks again ssinghal
excite
Jul 27, 2010 Rating
Check for obstruction by: Curt
Hi, You must remove the side plate to check for obstructions in the drive gear/track.
If the pump is still working when the robot stops then the transformer can be ruled out. If this is the case then the circuit board inside the motor compartment is the most likely suspect.
Unfortunately these internal motor parts are not available and Maytronics will recommend replacing the entire pump/drive system.
If you have an electronic repair shop nearby, you might be able to have them check the board after you remove it.
