I have a short. Every time I plug in aquabot it blows a fuse on power box.
I opened the unit removed the wire cover and grey putty and found broken wires causing short. Problem is I don't know what the correct wiring is to attach to motor screws. O have a brown and white from the floating cable external and on the inside is the two pump wires white and black. Not sure if the brown wire from floating cable connects to screw with the white pump wire and the white floating white connects with the black pump wire on the other screw. Anyone have a diagram or picture of how the motor pump wires and external floating cable wires are connected to the motor screws? Thanks in advance. Anthony
ADMIN REPLY: Typically the brown wire attaches closest to the pump and the white is the short wire. Connect the black pump wire to the brown.
Click here to post comments
Join in and write your own page! It's easy to do. How? Simply click here to return to Repair stories.