R38 Burned 2410073LF Rev 01 Control Board

by Dan
(Savannah, GA)

The R38 resistor on the control noted in the subject is burned out.

1. The unit is 5 years old. What causes this resistor to burn out?

2. What is the resistance and wattage of the resistor. I can not make out the colors due to the burning on the resistor case?

3. Based on some other write ups on burned out resistors on these PC boards, I believe this is either an 18 Ohm or a 0.1 Ohm resistor.

Please provide me with some assistance.

Thank you!

Dan

Comments for R38 Burned 2410073LF Rev 01 Control Board

Average Rating starstarstarstarstar

Click here to add your own comments

May 20, 2024
Rating
starstarstarstarstar
Dolphin pool up no funciona movimiento
by: Anonymous

Buenas, tengo un problema con mi Pool Up, el motor de movimiento funciona puesto que le ha aplicado 15 voltios externos y el motor gira, he comprobado la tensión en la placa y da 10 voltios por lo que no puede mover el motor de movimiento, no se si a alguien le ha pasado y cual es el componente de la placa electrónica que esta causando dicho problema gracias por vuestra colaboración. El otro motor funciona perfectamente y gira la helice.

Apr 20, 2024
Rating
starstarstarstarstar
R38 Resistor and R3 Resistor
by: Anonymous

Hello,

I have a 2410073LF Rev 02 Board and there is a 18Ohm 1W Resistor.

But can someone tell me which value has the R3 Resistor next tu U6?

Thank you.

Jul 15, 2023
Rating
starstarstarstarstar
maytronics 2410073LF
by: Dad

Does anyone have information on what models/motors these fit by rev #? Will an 2410073LF-rev 2 work for rev1 or rev 5 for rev 1 or 2? Someone told me each rev # had a different program.

Aug 06, 2022
Rating
starstarstarstarstar
R38
by: Anonymous

The resistor is of 18 ohms to 1 watt saludos

Jun 09, 2022
Rating
starstarstarstarstar
210073lf control board
by: Anonymous

does anyone have or know how to troubleshoot this board? i have correct power to board and no output to either motor. led on board never comes on. Nothing looks burned. with power to board should i be able to measure power to motor connections with them disconnected?

Jan 01, 2022
Rating
starstarstarstarstar
R38 Burned
by: Anonymous

If that resistor is burned, you can be sure that some transistor is burned too.

Nov 04, 2020
Rating
starstarstarstarstar
2410073LF
by: jake

does anyone know where to find a replacement board?

Aug 22, 2019
Rating
starstarstarstarstar
R38 keeps burning out on 24100075LF board
by: Rolf

Does anyone know what causes R38 to burn out on the 2410075LF diagnostic board. I’ve replaced it and it burns out as soon as I apply power to the board. The unit is a 6 year old Dolphin Supreme M4. Any help greatly appreciated!

Aug 19, 2017
Rating
starstarstarstarstar
F1 Fusible resistor burned
by: Gerard (The Netherlands)

Hello,
Does any of you still have a picture of the PCB
2410073LF
This fusible resistor F1 is burned so I can not determine the colours, I assume it must be a low resitance, say 0.1 ohm
Many thanks.

Sep 03, 2016
Rating
starstarstarstarstar
R38
by: Kenny

Any fixes yet? I tried the previously mentioned resistor (18ohms, 1%, 1/4 watt) but it burnt as soon as power was applied.
Any help would be appreciated.
Thanks,
Kenny

Sep 16, 2015
Rating
starstarstarstarstar
R38 value 2410074LF REV 03
by: Andy

Hi there, I have a slightly different board number which has an R38 resistor that is unreadable. It appears to be the only component damaged by a lightning strike.

Issue is that I have replaced this with an 18ohm 1W resistor and it burnt straight away - without any of the motors connected...

Wondering if the wattage of this resistor should be increased??

Appreciate any thoughts out there!

Cheers, Andrew

Aug 13, 2015
Rating
starstarstarstarstar
R38 Resistor Value
by: Dan

The R38 resistor value is 18 ohms, 1% tolerance and 1/4 watts. The color stripes are Brown, Gray, Black, Gold, Brown.
Puzzle solved!

Jul 05, 2015
Rating
starstarstarstarstar
R38 Resistor Value
by: Dan

Dom,
The picture of the board is too large to post from my iPad.
I will try again from my iPhone.
Send me a picture of your board if you can.
What is the number on the back of your board?
Do you have an R38 Resistor on it?
If so, what are the colors.
Thanks!
Dan

Jul 05, 2015
Rating
starstarstarstarstar
Resistor
by: Dom

If you can post a picture that would be extremely helpful, I can check my burned board as well. Many things can happen as to why it burns.

If you're interested in selling the burned board in looking for one :) accidentally got water in mine.

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Dolphin Maytronics Repair Comments.